适配器、电源、变压器安全规范设计手册重点.docx

Safety Design Manual Product Safety Center Safety Design Manual Product Safety Center Safety Design Manual Product Safety Center Safety Design Manual Product Safety Center Sq仞v Design Manual Adapter Power Supply EC 60950 , 1. (Marking and Instruction) (IT) Model Label: m odel label 0 ，( EU) 230V ac 230Vac 220-240Vac230Vac 230-240Vac 100-240Vac, 220Vac 240Vac . (10 PCB： Rating Q.~3) : PE (Protective Earth,), (2-1) (2-2) IEC 60950 (EN 60950, UL 1950) 1.2.13 a) Class 5V (b) Class V-0, (c) Class V-1, (d) Class V- 2 and (e) Class HB ( 1.2.13. 2-5); 5V = V-0 V-1 V-2 HB, (2-3) Class A 75 (75+25-10)=90 150 Class E 90 (90+25-10)=105 165 Class B 95 (95+25-10)=110 175 Class F 115 (115+25-10)=130 190 Class H 140 (140+25-10)=155 210 25 10 From IEC 60950(EN 60950, UL 1950) table 16 and Annex C, table C.1 UL(Class E ) UL UL 1446UL① UL 1446 UL ① DASH 2 B-5 ② HIS-8A) UL Class B (3-2) 60950 (EN 60950, UL 1950) Table 3, 4, 5 and 6① 60950 (EN 60950, UL 1950) Table 3, 4, 5 and 6 ① Primary Winding to Secondary Winding (Double or Reinforce Insulation)② Primary Winding to core (Basic Insulation)③ Secondary Winding to core (Supplementary Insulation) (Triple Insulation Wire) margin tape ① Primary Winding to Secondary Winding (Double or Reinforce Insulation)② Secondary Winding to core (Double or Reinforce Insulation). (3-3) Insulation tape, Bobbin, Margin tape, core, ULwire... UL (CTI) (3-4) PAGE # PAGE # Safety Design Manual Product Safety Center PAGE # PAGE # Safety Design Manual Product Safety Center 4. (4-1 IEC 60950 (EN 60950, UL 1950) (a) (Operational Insulation) 一 PE (b) (Basic Insulation) 一 PE SELV (c) (Double Insulation)- SELV (d) (Supplementary Insulation) 一 (e) (Reinforce Insulation)-  Basic Insulation 2.0mm 2.5mm 2.5mm 3.0mm Reinforced Insulation / Double Insulation 4.0mm 5.0mm 5.0mm 6.0mm EC 60950(EN60950, UL 1950) 0 (4-3) (4-2)(Clearance)(Creepage), (4-2) (Clearance) (Creepage), 10N 1kg (4-4) 0.4mm 1.0 mm. 5. (5-1) UL UL, UL File No., (7-1) (7-1) PAGE # PAGE #