制鞋业标准流程之_成型篇(图文并茂).pptxVIP

鞋面與大底成型ASSEMBLE UPPERO/S;1. 浸 康 特SOAK TR COUNTER;1,從裝鞋面的車架上取下鞋面,貼上流水標以便配雙作業,剪斷連線,放鞋面入流水帶上. Take the upper from the shelf and attach pair number sticker, then snip the thread that make one pair of upper together, at last put upper on conveyer belt. 2,剪線時不要剪到鞋面.Don’t break the upper when snip thread.3.注意鞋面要配雙. Note: Need make the upper pair.; 1.取一小塊泡棉,對折好再夾在夾子上,刷膠時將泡棉在膠水裡浸一下. Prepare a little piece of foam or cloth and fold then nip it with clamp. Soak a moment before cementing. 2.從裝楦頭的車上取下楦頭,將楦頭底面周圍10MM寬刷白膠 Take the last from the shelf , then cement around last bottom 10mm width with late