最新带隙基准源电路与版图设计.docx

收集 收集JM粘，如有侵权请联爲管理员除 收集 收集了州络，如有侵权造联系管丹员出院 论文题目：带隙基准源电路与版图设计 基准电压源具有相对较高的精度和稳定度，它的温度稳定性以及抗噪性能影响 着整个系统的精度和性能。模拟电路使用基准源，或者是为了得到与电源无关的偏 置，或者为了得到与温度无关的偏置，其性能好坏直接影响电路的性能稳定，可见 基准源是子电路不可或缺的一部分，因此性能优良的基准源是一切电子系统设汁最 基本和最关键的要求之一，而集成电路版图是为了实现集成电路设计的输出。本文 的主要目的是用BiCMOS工艺设计出基准源电路的版图并对其进行验证。 本文首先介绍了基准电压源的背景发展趋势及研究意义，然后简单介绍了基准 电压源电路的结构及工作原理。接着主要介绍了版图的设计，验证工具及对设计的 版图进行验证。 本设计采用40V的0.5u BiCMOS工艺库设计并绘制版图。仿真结果表明，设 计的基准电压源温度变化为-40°C~~85C,输出电压为2.5V及1.25V。最后对用Diva 验证工具对版图进行了 DRC和LVS验证，并通过验证，表明本次设计的版图符合 要求。 关键字：BiCMOS,基准电压源，温度系数，版图 Subject: Research and Layout Design Of Bandgap Reference Specialty: Microelectronics Name: Zhong Ting (Signature) Instructor: Liu Shulin (Signature) ABSTRACT The reference voltage source with relatively high precision and stability, temperature stability and noise immunity affect the accuracy and performance of the entire system. Analog circuit using the reference source, or in order to get the bias has nothing to do with power, or in order to be independent of temperature, bias, and its performance directly affects the performance and stability of the circuit shows that the reference source is an integral part of the sub-circuit, excellent reference source is the design of all electronic systems the most basic and critical requirements of one of the IC layout in order to achieve the output of integrated circuit design. The main purpose of this paper is the territory of the reference circuit and BiCMOS process to be verified. This paper first introduces I he background of the trends and significance of the reference voltage source, and then briefly introduced the structure and working principle of the voltage reference circuit. Then introduces the layout design and verification tools to verify the design of the territory. This design uses a 40V 0.5u BiCMOS process database design and draw the layout.The simulation results show that the design of voltage reference temperature of -40 ° C ~ ~ 85 ° C, the output voltage of 2.5V and 1.25V. Finally, the Diva v