全面的品质管控培训资料(英文版).pptx

本资料来源;Chapter 17;Overview;Introduction;QC Throughout Production Systems;Services and Their Customer Expectations;Products and Their Customer Expectations;Sampling;Sampling;Size and Frequency of Samples;When to InspectDuring the Production Process;Central Limit Theorem;Sampling Distributions;Population and Sampling Distributions;Control Charts;Constructing Control Charts;Constructing Control Charts;Control Charts for Attributes ;Although the distribution of sample information follows a binomial distribution, that distribution can be approximated by a normal distribution with a mean of p standard deviation of The 3s control limits are;Example: Attribute Control Chart;Example: Attribute Control Chart;Example: Attribute Control Chart;Example: Attribute Control Chart;Example: Attribute Control Chart;Inspection of the units in the sample is performed on a variable basis. The information provided from inspecting a sample of size n is: Sample mean, x, or the sum of measurement of each unit in the sample divided by n Range, R, of measurements within the sample, or the highest measurement in the sample minus the lowest measurement in the sample;In this case two separate control charts are used to monitor two different aspects of the process’s output: Central tendency Variability Central tendency of the output is monitored using the x-chart. Variability of the output is monitored using the R-chart.;x-Chart;R-Chart;;Example: Variable Control Chart;Example: Variable Control Chart;Example: Variable Control Chart;Example: Variable Control Chart;Example: Variable Control Chart;Acceptance Plans;Acceptance Plans;Single-Sampling Plan;Single-Sampling Plan;Double-Sampling Plan;Double-Sampling Plan;(c1’ + c2’) c2;Sequential-Sampling Plan;;Definitions;Definitions;Definitions;Considerations inSelecting a Sampling Plan;Operating Characteristic (OC) Curve;Operating Characteristic (OC) Curve;OC Curve (continued);Average Outgoing Quality (AOQ) Curve;AOQ Curve;AOQ Curve;Com