(完整版)手机充电器外壳设计毕业设计论文.pdfVIP

优秀论文 审核通过 未经允许 切勿外传 手机充电器外壳设计 作者姓名： 专业名称：机械设计与制造 指导教师： 摘 要 计算机仿真设计是制造业中的新型手段，是应用电子计算机对系统 的结构、功能和行为以及参与系统控制的人的思维过程和行为进行动态 性比较逼真的模仿。它是一种描述性技术，是一种定量分析方法。通过 建立某一过程和某一系统的模式，来描述该过程或该系统，然后用一系 列有目的、有条件的计算机仿真实验来刻画系统的特征，从而得出数量 指标，为决策者提供有关这一过程或系统得定量分析结果，作为决策的 理论依据。 运用计算机软件对运动和动力学仿真分析，从而验证、修改、优化 设计方案，使得以前需要组织研究团队，进行复杂设计计算，制造物理 样机验证结果的设计过程大大简化，节约成本。下面我们通过 pro\E 对 手机充电器外壳进行结构设计、参数设计及三维建模。 关键词：三维建模 仿真技术 Abstract Computer simulation design is new in manufacturing, which means to apply a compute system structure, function and behavio and participation of control system fo dynamic process of thinking and behavio of comparative lifelike imitation. It is a descriptive technology, is a kind of quantitative analysis method. By establishing a process and a system model, to describe this process or the system, thenuse a series ofpurpose, conditional compute simulation experiment to depict the system characteristic, thus draws quantitative index fo decision makers with this process o systems quantitative analysis results, as decision theory basis. Using compute software means of movement and dynamics simulation, which testified, modify, optimizing design scheme, making that need to be organized research team, before the complex design calculation, manufacturing physical prototype design of the results of the validation process, saving cost greatly simplified. Below we through the pro \ E of cell phone charge shell structure design, parameter design and 3d modeling. Key words: 3d modeling，The simulation technology 目 录 摘 要I Abstract II 目 录III 前 言 1 绪 论 2 1 手机充电器简介 2 2 电话的市场调 4 3 手机充电器的市场走向 5 1 材料的选取 10 1．1AB