文本文稿说明ab plc学习电气umentation and naming.pptxVIP

Global Common Controls Hardware Design SpecificationGCCH-1;1. The students will learn where to identify and locate the GM EPLAN P8 User Manual CCH-5 Section A. 2. The students will learn where to identify and locate the GM EPLAN P8 Installation Manual CCH-5 Section I. 3. The students will define EPLAN P8. 4. The students will define the GM configuration for EPLAN P8. 5. The students will identify project templates. 6. The students will define EPLAN P8 deliverables formats. 7. The students will define the naming conventions. ; To document and provide guidelines for standard methods for the generation of GM wiring diagrams (WD’s) using the ePLAN P8 CAE software. ; This guide is primarily used by controls design personnel. It shall be used by all personnel (e.g., controls engineers, machine tool builders, installation personnel and in-plant resources) involved in the design of WD’s for GM. This document shall be used in all phases of the design process. ;GM ePLAN P8 User Manual CCH-5 Section A Located on GM SupplyPower. ;; To document and provide guidelines for ePLAN P8, RDS Client and also GM Configuration Files for the generation of GM wiring diagrams (WD’s) using the ePLAN P8 CAE software. ; This guide is primarily used by controls design personnel. It shall be used by all personnel (e.g., controls engineers, machine tool builders, installation personnel and in-plant resources) involved in the design of WD’s for GM. This document shall be used in all phases of the design process. ;GM ePLAN P8 User Manual CCH-5 Section I Located on GM SupplyPower.;;ePLAN is standard for (CAE) Computer Aided Engineering of Control Systems Design. ePLAN is data base design environment. ePLAN design analysis is done in reduced time then prior systems. Migration to ELAN will be based on GM programs and project schedules, and approved for all future controls designs.;GM ePLAN Configuration and Master Data shall be used in ePLAN on all GM Projec