一种新型三维椭圆振动切削装置 设计研究.pdfVIP

Mechanical Engineering and Technology 机械工程与技术, 2019, 8(2), 158-165 Published Online April 2019 in Hans. /journal/met /10.12677/met.2019.82020 Design of a Novel Tri-Axial Device for Elliptical Vibration Cutting Qi Liu, Yifan Song School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing Jiangsu th st th Received: Apr. 8 , 2019; accepted: Apr. 21 , 2019; published: Apr. 28 , 2019 Abstract For complex surface of refractory materials, three-dimensional elliptical vibration cutting is con- sidered to be a promising cutting method. In this paper, a three-dimensional elliptical vibration cutting device was designed with piezoelectric drive and flexible hinge guidance, and the kine- matics and modal analysis of the structure are carried out with the help of finite element method. The motion trajectory and the first six modes of the structure are simulated and analyzed, and the feasibility of the structure is verified. Keywords Three-Dimensional Elliptical Vibration Cutting, Flexible Hinge, Finite Element Analysis 一种新型三维椭圆振动切削装置的 设计研究 刘 绮，宋逸凡 南京理工大学，机械工程学院，江苏 南京 收稿日期：2019年4月8 日；录用日期：2019年4月21 日；发布日期：2019年4月28 日 摘 要 空间三维椭圆振动切削被认为是难加工材料复杂表面切削极具发展前景的切削方法。采用压电驱动和柔 性铰链导向，本文设计了一种新型的空间三维椭圆振动切削装置，并借助有限元方法对装置结构进行了 运动学分析和模态分析，仿真分析了结构的运动轨迹和前六阶模态，验证了所设计结构的可行性。 文章引用: 刘绮, 宋逸凡. 一种新型三维椭圆振动切削装置的设计研究[J]. 机械工程与技术, 2019, 8(2): 158-165. DOI: 10.12677/met.2019.82020 刘绮，宋逸凡 关键词 三维椭圆振动切削，柔性铰链，有限元分析 Copyright © 2019 by author(s) and Hans Publishers Inc. This work is licensed under the Creative Commons Attribution International License (CC BY). /licenses/by/4.0/ Open Access