5G技术培训LTE SC summary课程.docxVIP

3692 Name enableNsaX2Comp used for 857 858 861 857: 是否建立NR Leg 858: 是否建立B1测量 861: 是否建立NR Leg，用于判断是否keep Nr的条件之一 Value 0 - Disabled 1 - Enabled Range 0 ~ 1 Default value 1 macro name in Code SYS_CONST_ENABLE_NSA_X2_COMP_ID 3882 Name twoStepUeCapaEnquiry Used for 857 分两步分别获取EUTRA和NR 的UE能力。针对QC UE 更改. Value 0 - Disabled 1 - Enabled Range 0 ~ 1 Default value 0 macro name in Code SYS_CONST_TWO_STEP_UE_CAPA_ENQUIRY_ID 3886 Name EricssonUEorNot used for 857 861 Workaround skip some parameters check for Ericsson NRUE 跳过检查MRDC Capability, for 857 跳过配置PDCP config in RRC CONNECTION RECONFIGURATION, for 861 857 配置 dlCarrierBandwidth, for 861. Value 0- NotEricssonUE 1- EricssonUE Range 0 ~ 1 Default value 0 macro name in Code SYS_CONST_CMCC_FT_ERICSSON_NRUE_OR_NOT_ID 3892 Name nrLegReleaseEnabler 857 860 All MeNB functionalities in NR leg release is enable or disable by this system constant Value 0 - Disable 1 - Enable Range 0 ~ 1 Default value 0 macro name in Code SYS_CONST_NR_LEG_RELEASE_ENABLER_ID 3900 Name ueCapaMrdcDecode Used for 857 UE capabilities MRDC (38.331) is decoded or not decoded by this system constant. 是否跳过检查 MRDC UE能力 Value 0 - Disable 1 - Enable Range 0 ~ 1 Default value 0 macro name in Code SYS_CONST_UE_CAPA_MRDC_DECODE_ID 3917 Name cmccFtEndcX2SetupEnabled used for 857 Specifies whether the Endc x2 setup procedure is enabled， 要配合mom参数zzzTemporary63 一起使用，zzzTemporary63 == 1 且 SC3917 == 1时 Endc X2 setup流程enable. 代码里没找到！ Value 0 - Endc X2 setup disabled 1 - Endc X2 setup enabled Range 0 ~ 1 Default value 1 macro name in Code SYS_CONST_CMCC_FT_ENDC_X2_SETUP_ENABLED_ID 3979 Name cmccFtConfigReportQuantityCellNrR15 used for 858 MeasConfig中 配置reportQuantityCellNR_r15的RSRP/RSRQ/SINR Value 3bit从高到低依次代表SINR/RSRQ/RSRP 0 - Disabled 1 - Enabled 1: 仅上报RSRP 2: 仅上报RSRQ 3: 上报RSRP 和RSRQ 4: 仅上报SINR 5: 上报SINR 和RSRP 6: 上报SINR 和 RSRQ 7: 上报SINR, RSRQ和RSRP Range 1 ~ 7 Default value 1 macro name in Code SYS_CONST_CMCC_FT_CONFIG_REPORT_QUANTITY_CELL_NR_R15_ID 3980 Name