船舶定位与导航模块五电子海图显示与信息系统JRC-ECDIS-TypeSpecificTraining-rev-a-1[1].pdf

JRC ECDIS JRC ECDIS Type Specific Training Type Specific Training Model: JAN-701B/901B/2000 JAN-701/901M 1. ECDIS system configuration and initial operation 1.1 How to Power On/ Off the JRC ECDIS Power ON Press the [POWER] key on the operation panel Power OFF Press the [POWER] key on the operation panel Caution: Do not keep pressing the [POWER] key because the forced OS termination would be performed. Not required to shut down Not required to shut down the windows program with manual the windows program with manual 1. ECDIS system configuration and initial operation 1.2 Configuration of Software Operation software (OS) Windows XP Embedded: The componentized version of Windows XP Professional Application software JRC ECDIS software: The application software operating on Windows XP Embedded was designed by JRC 1. ECDIS system configuration and initial operation 1.3 Configuration of the disk drive Pass Disk drive Storage content C SDD OS, JRC ECDIS software (Silicon Disk Drive) D HDD: Master Charts, Routes, Event logs, Own tracks, (Hard Disk Drive) Alarm lists, User added information and etc. E HDD: Backup Backup of Master drive (Hard Disk Drive) 1. ECDIS system configuration and initial operation 1.4 How to check status for malfunction of HDD Confirming HDD malfunction Open “Alarm List” panel if “Disk1 Error” or “Disk 2 Error” alarm occurs on the bottom of Display panel Audible Visual Alarm 1. ECDIS system configuration and initial operation 1.5 How to switch over HDD Switching over HDD as provisional action Input password “0000” on the startup menu In the case of D drive(Disk1) is malfuncti