ABL800血气分析仪资料：01－2定标.pptVIP

* * * Definition: The status of an electrode describes the deviation at the 1-point calibration point of the actual electrode response, from the response of a theoretical electrode E.g.: the electrode measures –100 mV, where it “should” have measured –106 mV. Status shows you on the x-axis what this reading would have given on the theoretical cal line. * Description: the drift of an electrode describes how much one calibration differs from the last accepted calibration. Drift 1 represent the fluctuation in the behavior of the electrode. Whether these fluctuations are allowable or not is deter