CATIAV5R16官方培训教程六.pptxVIP

CATIA Training FoilsSketcher V5R9 UpdateVersion 5 Release 9June 2002EDU-CAT-E-SKE-UF-V5R91 hourCourse PresentationObjectives of the courseIn this course you will see the main enhancements in the Sketcher workbenchTargeted audience CATIA V5R8 users Prerequisites V5R8 Sketcher Table of ContentsIntroduction to Sketcher Workbench p.4User Interface: Sketcher p.5Creating Sketches using Absolute Axis Definition p.6Other Enhancements about Sketcher p.10Sorting Sketches by their Solving Status p.12Highlighting Reference Element in Sketcher p.15Introduction to Sketcher WorkbenchYou will become familiar with the Sketcher Workbench.The Sketcher User InterfaceV5R9User Interface: SketcherV5R9Creating Sketches using Absolute Axis Definition You will learn how to create a Sketch by specifing its 3D position and orientation.V5R9V5R9Creating Sketches using Absolute Axis Definition (1/3)1 Select one face of your Pad. 2Select the Sketch positionning icon.A dialog box appears. You can now define the Absolute Axis System. In our example, we choose the “intersection of 2 lines” option. These two lines correspond respectively to the vertical and horizontal edges of the Pad.3Creating Sketches using Absolute Axis Definition (2/3)The Absolute Axis System is now created. Its origin is the intersection of the two edges. If we create a Sketch (pocket), it will be positionned regarding to the Absolute Axis System.4Creating Sketches using Absolute Axis Definition (3/3)After changing the length of the Pad, we can see that the pocket changes position. It is not the case for the hole because it has not been created with the Sketch positionning command.5Other Enhancements about SketcherYou will see two enhancements about Sketcher : how to sort Sketches by their Status (Under-Defined, Well-Defined, Over-Defined and Inconsistent) and to how to highlight Reference Element in Sketch Analysis.Sorting Sketches by their Solving StatusHighlighting Reference ElementWhat are Status for a Sketch ?Yo