基于TRIZ理论塑胶管喷码错位问题分析.pdfVIP

Instrumentation and Equipments 仪器与设备 , 2016, 4(3), 29-34 Published Online September 2016 in Hans. /journal/iae /10.12677/iae.2016.43005 Analysis for Marking Dislocation of Plastic Pipe Based on TRIZ Theory Haizhen Li, Fusheng Yu, Jiali Zhang, Changyong Zhou School of Mechanical and Electrical Engineering, Shandong Jianzhu University, Jinan Shandong th th th Received: Aug. 16 , 2016; accepted: Sep. 6 , 2016; published: Sep. 9 , 2016 Copyright ? 2016 by authors and Hans Publishers Inc. This work is licensed under the Creative Commons Attribution International License (CC BY). /licenses/by/4.0/ Open Access Abstract This article analyzes the marking dislocation of plastic pipe and proposes several optimized schemes based on TRIZ theory. Through TRIZ theory, we grasp the resources of every part efficiently and discover various original causes of contradictions and the evolution direction of the system so that the problems of this system are solved more efficiently. The technology system is analyzed in detail through problem definition, ideal final result (IFR) definition, resource analysis and causal analysis. Finally, a series of solutions are put forward by using TRIZ inventive principles. At the end of this paper, the innovation and feasibility of the solutions are evaluated. Keywords TRIZ Theory, Plastic Pipe, Marking Machine 基于 TRIZ 理论的塑胶管喷码错位问题分析 李海祯，于复生，张佳丽，周长勇 山东建筑大学机电工程学院，山东 济南 收稿日期： 2016 年 8月 15 日；录用日期： 2016 年 9 月6 日；发布日期： 2016年 9月 9 日 摘 要 本文基于 TRIZ 理论， 对现阶段塑胶管喷码易错位的问题进行分析并提出了优化方案。 通过 TRIZ 理论的分 文章引用 : 李海祯 ,