ANSYS 变压器耦合场程序.docxVIP

— PAGE \* Arabic 1 — ANSYS 变压器耦合场程序 /clear,all corediam=95*1e-3 !铁心直径icorewindow=295*1e-3 !铁心内长ocorewindow=390*1e-3 !铁心外长corecentra=435*1e-3 !铁心中心距w1=108 !原边绕组匝数w2=97 !公共绕组匝数w3=56 !延伸绕组匝数(靠近铁心)gap1=8.5*1e-3 !延伸绕组与铁心之间的间隙gap2=7.0*1e-3 !延伸绕组与公共绕组的间隙gap3=16.5*1e-3 !原边绕组与公共绕组的间隙u1=220 !原边绕组电压u2=196.7025 !公共绕组电压u3=113.5662 !延伸绕组电压!nc=6 !!绕组数!*dim,i,array,nc !定义一个数组参数及尺寸!*dim,coils,char,nc !定义一个字符参数及尺寸!i(1)=40.8248 !左原边绕组电流!i(2)=23.5702 !左公共绕组电流!i(3)=40.8248 !左延伸绕组电流!i(4)=40.8248 !右原边绕组电流!i(5)=23.5702 !右公共绕组电流!i(6)=40.8248 !右延伸绕组电流!coils(1)=wind1 !左延伸绕组!coils(2)=wind2 !左公共绕组!coils(3)=wind3 !左原边!coils(4)=wind4 !右延伸绕组!coils(5)=wind5 !右公共绕组!coils(6)=wind6 !右原边绕组extendwidth=39*1e-3 !延伸绕组径向宽度publicwidth=31*1e-3 !公共绕组径向宽度primarywidth=63*1e-3 !原边绕组径向宽度windingshigh=201*1e-3 !绕组的轴向高度iextenddiam=corediam+gap1*2 !!!延伸绕组内直径oextenddiam=iextenddiam+extendwidth*2 !!!延伸绕组外直径ipublicdiam=oextenddiam+gap2*2 !!!公共绕组内直径opublicdiam=ipublicdiam+publicwidth*2 !!!公共绕组外直径iprimarydiam=opublicdiam+gap3*2 !!!原边绕组内直径oprimarydiam=iprimarydiam+primarywidth*2 !!!原边绕组外直径tanklength=950*1e-3 !!!油箱长tankwidth=540*1e-3 !!!油箱宽tankhigh=650*1e-3 !!!油箱高/title,coupled-field transformers/prep7et,1,solid97 !!!铁心和铁轭以及内层空气et,2,solid97,3 !!!绕组et,3,infin111,1 !!!模拟无穷远边界et,4,circu124,0 !!!电阻et,5,circu124,4 !!!独立电压源et,6,circu124,5 !!!stranded coilEMUNIT,MKS!!!定义材料属性mp,murx,1,1 !!!线圈mp,rs,1,1.7241*1e-8 !!!线圈的电阻mp,murx,2,1 !!!空气mp,murx,3,60000 !!!RELATIVE PERMEABILITY of core!!!建立模型cylind,0,corediam/2,0,ocorewindow,0,360 !以工作平面圆点为中心生成半圆柱体（铁心）wpoffs,corecentra !X方 向偏移工作平面铁心中心距 cylind,0,corediam/2,0,ocorewindow,0,360 !以工作平面圆点为中心生成半圆柱体（铁心）wpcsys,-1,0 !平面坐标回归block,0,corecentra,-corediam/2,corediam/2,0,corediam/2 !建填充体wpoffs,,,icorewindow+corediam/2block,0,corecentra,-corediam/2,corediam/2,0,corediam/2 !建填充体wpcsys,-1,0 !平面坐标回归allsel,allvovlap,all !体搭接vglue,all !体间相互粘接numcmp,allvsel,all*get,vmax1,volu,,num,maxvsel,allvatt,3,1,1,0 !赋铁心属性wpoffs,,,