微型数控车床设计.docx

微型数控车床设计 夕女c g SHANDONGUNIVERSUY OF TECHNOLOGY 毕业设计说明书 微型数控车床设计 业:机械设计制造及其自动化学生姓名: 摘要的页眉自己再添上学 院：机械工程学院 业: 机械设计制造及其自动化 学生姓名: 摘要的页眉自己再添上 学 号： 指导教师: 2011年06月 -S4 -S4 - -S4 -S4 - 摘要 微型数控车床又称数字控制（Numerical control,简称NC）机床。它是基于数 字控制的，釆用了数控技术，是一个装有程序控制系统的机床.它是由主机， CNC,驱动装置，数控机床的辅助装置，编程机及其他一些附属设备所组成。该 数控车床主要由教学型车床机械装置、计算机数控系统、电源驱动装置三部分 组成，此次设计包括机床的机械传动主运动系统设计，其中还包括齿轮模数计 算及校核，主轴的设计及其刚度的校核，主轴组件的设计与选型，传动轴的设 计及其刚度校核和传动轴组件的设计与选型等，纵向进给传动系统运动设计， 横向进给传动系统运动设计，床身与导轨设计和控制系统的设计?变频调速电 动机和步进电动机型号的选择以及刀架型号的选择等。该车床结构简单、成本 低、体积小，适于教学，该系统人机界面友好、操作方便。本文是对整个设计 工作较全面的介绍和总结。 关键词：微型，数控车床，主传动系统，进给系统，设计 -34 -34 - -34 -34 - Abstract The miniature nuinerically controlled lathe calls digital control (Numerical control, shorter form NC) a machine tool. That it has been digital control-based , has adopt the numerical control technology, is that a dress has controlling the systematic machine tool by program. It is from the lead plane , CNC , driving device, niinierical control iiiaehine tool auxiliary device , what programming machine and their his some subsidiary equipment Is composed of. Design designing that the ineehanlcal drive including a inachine tool betokens motion system this time, including the module of the gear, the principal axis calculate and rigidity revise, the principal axis subassembly design and choose, the transmission shaft calculate and rigidity revise, the transmission shaft subassembly design and choose, longitudinal medianical drive feeds systematic motion design, latitudinal mechanical drive feeds systematic motion design. The type of frequency conversion timing electromotor choose and the type of walking electromotor choose, and the type of knife rest choose. This paper Is more coinpehensive introduction and summing-up for the whole design work. Key words: mlniatiire5niimerically controlled lathe mechanlcahdrlve system betokens systematic, feed drive system, design. -34 - 目录 目录 - -34 - 目录 目录 - -34 - -1-第五童床身与导轨5. 1 -1- 第五童床身与导轨 5. 1床身设计 ?39? ?39? 第一章引言 1.1课题的