单片机六路抢答器C语言程序.doc

单片机六路抢答器C语言程序 单片机六路抢答器C语言程序 PAGE / NUMPAGES 单片机六路抢答器C语言程序 单片机六路数显计时抢答器 c 语言程序 sbit key6=P1^5; #include sbit key7=P1^6; #define uint unsigned int sbit key8=P1^7; #define uchar unsigned char sbit jia=P3^4; unsigned char code sbit jian=P3^5; table[]={0xc0,0xf9,0xa4, bit action = 0; 0xb0,0x99, uchar second=10,a[7]={0}; 0x92,0x82,0xf8,0x80,0x90,0xc0} uchar timer0_count = 0; ; uchar number=0; sbit start=P3^6; uchar number_display = 0; sbit reset=P3^7; uchar k; sbit key1=P1^0; void delay(uint z) sbit key2=P1^1; { sbit key3=P1^2; uint x,y; sbit key4=P1^3; for(x=z;x0;x--) sbit key5=P1^4; for(y=120;y0;y--); delay(1); } P2 = 0x10; void display(uchar number,uchar P0 = table[a[2]]; second) delay(1); { P2 = 0x20; P2 = 0x01; P0 = table[a[3]]; P0 = table[second]; delay(1); delay(1); P2 = 0x40; P2 = 0x02; P0 = table[a[4]]; P0 = table[number]; delay(1); delay(1); P2 = 0x80; P2 = 0x04; P0 = table[a[5]]; P0 = table[a[0]]; delay(1); delay(1); } P2 = 0x08; void start_keyscan() P0 = table[a[1]]; { uchar key_scan8() void fengling(); { while(start == 0) if(key1 == 0) { { key7=0; delay(8); if(key1 == 0) display(number_display,second); { if(start == 1) number = 1; { number_display = key7=1; number; action = 1; } TR0 = 1; } } if(key2 == 0) } { } delay(8); if(key2 == 0) { if(key4 == 0) number = 2; { number_display = delay(8); number; if(key4 == 0) } { } number = 4; if(key3 == 0) number_display = { number; delay(8); } if(key3 == 0) } { if(key5 == 0) number = 3; { number_display = delay(8); number; if(key5 == 0) } { } number = 5; number_display = return number_display; number; } } else } { if(key6 == 0) return 0; { } delay(8); } if(key6 == 0) void reset_keyscan() { { number = 6; if(reset == 0) number_display = { number; delay(8); } if(reset == 0) } { if(number_display != 0) number_display = 0; { second=10; } } } void main() { TMOD=0x01; TH0=(65536-50000)/256; TL0=(65536-50000)%256; EA=1; ET0=1; TR0=0; P2=0x00; while(1)  reset_keyscan(); start_keyscan(); if(jia==0a[number-1]9) { delay(10); while