gen中分析报错总结.docxVIP

第 PAGE 1 页 共 NUMPAGES 3 页 Gen中分析报错总结 1、MAXIMUM NUMBER OF ITERATION HAS BEEN REACHED CHECK TOLERANCE IN THE VIBRATION RESULT TABLE RECOMMENDATION FOR BETTER CONVERGENCE : INCREASE THE SUBSPACE DIMENSION GREATER THAN MIN(2Nf, Nf+8) (Nf=NUMBER OF FREQUENCIES) 得到最大迭代次数，请在振动结果表中检查公差。建议增加子空间维数，大于MIN(2Nf, Nf+8) Nf=数量的频率 解：修改“子空间大小” 2、节点奇异 解：要查看边界条件及荷载加载 3、静力弹塑性分析的报错，例题“上海建工林晨” [WARNING] : THE YIELDING OCCURRED IN THE INELASTIC HINGE BY INITIAL LOADING : [My_I-End] COMP. OF BEAM NO. 2017 [WARNING] : THE YIELDING OCCURRED IN THE INELASTIC HINGE BY INITIAL LOADING : [My_I-End] COMP. OF BEAM NO. 2024 [WARNING] : THE YIELDING OCCURRED IN THE INELASTIC HINGE BY INITIAL LOADING : [My_I-End] COMP. OF BEAM NO. 4059 [WARNING] : THE YIELDING OCCURRED IN THE INELASTIC HINGE BY INITIAL LOADING : [My_J-End] COMP. OF BEAM NO. 4306 [WARNING] : THE YIELDING OCCURRED IN THE INELASTIC HINGE BY INITIAL LOADING : [My_I-End] COMP. OF BEAM NO. 4323 [WARNING] : THE YIELDING OCCURRED IN THE INELASTIC HINGE BY INITIAL LOADING : [My_J-End] COMP. OF BEAM NO. 4570 [WARNING] : THE YIELDING OCCURRED IN THE INELASTIC HINGE BY INITIAL LOADING : [My_I-End] COMP. OF BEAM NO. 4587 [WARNING] : THE YIELDING OCCURRED IN THE INELASTIC HINGE BY INITIAL LOADING : [My_J-End] COMP. OF BEAM NO. 4834 [WARNING] : THE YIELDING OCCURRED IN THE INELASTIC HINGE BY INITIAL LOADING : [My_I-End] COMP. OF BEAM NO. 4850 [WARNING] : THE YIELDING OCCURRED IN THE INELASTIC HINGE BY INITIAL LOADING : [My_J-End] COMP. OF BEAM NO. 5098 [WARNING] : THE YIELDING OCCURRED IN THE INELASTIC HINGE BY INITIAL LOADING : [My_I-End] COMP. OF BEAM NO. 5114 [WARNING] : THE YIELDING OCCURRED IN THE INELASTIC HINGE BY INITIAL LOADING : [My_I-End] COMP. OF BEAM NO. 5131 [WARNING] : THE YIELDING OCCURRED IN THE INELASTIC HINGE BY INITIAL LOADING : [My_J-End] COMP. OF BEAM NO. 5367 [WARNING] : THE YIELDING OCCURRED IN THE INELASTIC HINGE BY INITIAL LOADING : [My_I-End] C