十个台锯附件.pdfVIP

x x S x u x 10 Best Table Saw Jigs n x o x The table saw is king in my shop. It sits right in the I’m not talking about jigs that are difficult to build or b x middle where I can get at it easily. Whether it’s rough time consuming to set up. Even the more “involved” e cutting a board to length or fine tuning a project’s join- jigs here can be built in just a few hours. x n ery, more than likely I’ll go to the table saw. But what just a note. Some of these accessories are designed xi l really makes my table saw so versatile are the shop- and sized to fit my 10 contractor’s saw. But they can be x n built “helpers” I’ve accumulated through the years. adapted to fit just about any brand or size of table saw. x ox 1 Push Block It might seem like a pretty simple accessory, but I’ve found that using the right push block not only makes your work safer, it can also improve the quality. The main purpose of a good push block is to keep your fingers far away from the saw blade. And the first thing you’ll notice about this push block, shown at work in the photo at right, is the comfortable “high mounted” handle. This is definitely a big plus in my book. The best part is that you don’t have to sacrifice any- thing when it comes to control. The forward sweep of the handle allows you to put good downward pressure on the workpiece and achieve a steady, controlled feed. You’ll get a clean cut while keeping your hands safe is designed with a business end that can be easily and avoiding the risk of kickback.