比较器失调仿真.pdfVIP

The Designer’s Guide Community downloaded from A Methodology for the Offset- Simulation of Comparators Achim Graupner ZMD AG, Dresden Version 1, October 1, 2006 A methodology for determining the input referred offset voltage of comparators is pre- sented. This in general is difficult as the output of a comparator is discrete valued. The method relies on a Monte-Carlo-Simulation with certain comparator input values and some postprocessing of the comparator output data. The comparator is always operated in its intended environment, there is no modification of the comparator itself nor some unusual stimuli required. There is also no known restriction for the type of comparators to be analyzed. Last updated on November 2, 2006. You can find the most recent version at www.designers- . Contact the author via e-mail at graupner@zmd.de. Permission to make copies, either paper or electronic, of this work for personal or classroom use is granted without fee provided that the copies are not made or distributed for profit or commercial advantage and that the copies are complete and unmodified. To distribute other- wise, to publish, to post on servers, or to distribute to lists, requires prior written permission. Copyright © 2006, Achim Graupner – All Rights Reserved 1 of 7 A Methodology for the Offset-Simulation of Comparators Introd