creatingasafetyprogram商业安全大纲培训(英文).pptxVIP

CREATING A SAFETY PROGRAM forYOUR SMALL BUSINESSHCAPre Course QuizWhat is an incident?___________________________________________________________Power tools must be fitted with guards and safety switches. True or FalseEmployees attitude may affect safety . True or FalseFall protection is required any time you use a ladder over 6 feet. True or FalseEmployees are must take personal responsibility for their safety, their co-workers and others on a jobsite. True or FalseMSDS’s are required for most chemicals used at a worksite and should be kept locked up in the supervisor’s office for Safety. True or FalseGuard rails should be installed along all open sides and ends of platforms. True or FalseWhen setting up goals for safety on a worksite the acceptable number of incidents should be set at___________. (give a number)If a fatality happens on a jobsite due to negligence, unsafe conditions, etc. Who is usually responsible and held accountable? Owner of company, Supervisor, Co-worker.Circle oneSafety rules and guidelines and must always be written. True or FalseIt is OSHA’s responsibility to establish and implement a written hazard communication program. True or FalseApproximately 32 million workers work with or are potentially exposed to chemical hazards. True or FalseMSDS’s are printed on a mandatory standard OSHA form.PPE is usually an optional step for employees in dealing with hazardous chemicals. True or FalseHazCom is commonly referred to as Right to know True or FalseWhat is a Near Miss?_____________________________Do these need to be reported and investigated? True or FalseEmployers are responsible to pay for all PPE for their employees. True or FalseSafety Inspections should be conducted on all sites at least yearly. True or FalseOSHA mandates First aid and CPR training for workers on sites. True or FalseAHA stands for “All Hands Attention”. True or FalseFour Elements Of a Workplace Safety ProgramElement #1 - Management, Leadership and Employee Involvem