5.1 Equipment installation and construction process设备安装施工工艺.pdfVIP

Technical Proposal China Nuclear Industry Fifth Construction Co., Ltd TENDER No: 2013 ERXNY 004 DPC K5BPO 00 Special programs 中 国 核 工 业 第 五 建 设 有 限 公 司 5.1 Equipment installation and construction process 设备安装施工工艺 5.1.1 General 概述 5.1.2 The basis for preparing 编制依据 5.1.3 Static equipment installation 静设备安装 5.1.4 Rotating equipment installation 动设备安装 Rev. Page 1 of 18 2013/8/19 Technical Proposal China Nuclear Industry Fifth Construction Co., Ltd TENDER No: 2013 ERXNY 004 DPC K5BPO 00 Special programs 中 国 核 工 业 第 五 建 设 有 限 公 司 5.1. Equipment installation and construction process 设备安装施工工艺 5.1.1. General 概述 5.1.1.1. The construction process prepared for BMSC PCS Expansion Line 200kt Project – DPC MEP Installation Works 本施工工艺为拜耳材料科技（中国）有限公司，拜耳材料科技中国 20 万吨/年聚碳酸酯扩建项目 DPC 项目机电设备安装工程而编制 5.1.1.2. The project equipment totaling 181 units, rotating equipment about 20 units, single maximum weight of 135 tons of phosgene reactor, monomer is greater than 20 tons of equipment 8. 该工程项目设备共计 181 台，动设备约 20 台，单台最大重量 135 吨的光气反应器 1 台，单体大于 20 吨设备 8 台。 5.1.2. The basis for preparing 编制依据 5.1.2.1. Bayer DPC expansion project tender documents 拜耳 DPC 扩建项目招标文件 5.1.2.2. Code for quality acceptance of static equipment installation in petrochemical engineering 石油化工静设备安装工程施工质量验收规范 GB50461-2008 5.1.2.3. Technical procedure for construction of static equ