BOE京东方学习材料 PurifierPurgeLesson.pptVIP

课程内容 Contents 第一部分 结构、原理、控制 第二部分 维修保养 第三部分 过滤罐安装、更换 为什么需要排气系统？ 空气 水气 小于 0 PSIG R-113, R-11, R-123 冷媒漏出 空气漏入 哪个更不利? 设备泄漏 真空不好 冷媒不纯 空气 气态冷媒 液态水 液态冷媒 机组运行? 停机? 冷凝器？ 蒸发器？ Purifier排气系统 清洁排气系统 排气装置限流孔 排气系统运行原理典型工况：（70F环境温度 / 8PSIG冷凝压力）排气时间：每次40-60秒 排气系统运行原理 排气系统运行原理 排气装置控制 排气装置控制 As the purge unit advanced in quality and technology you asked for a way to log what has happened in the past. You now have that capability. The purge now has status conditions that will show on the purge reports. The terms must be understood. ___________________________________________________ ___________________________________________________ ___________________________________________________ ___________________________________________________ ___________________________________________________ ___________________________________________________ ___________________________________________________ ___________________________________________________ ___________________________________________________ ___________________________________________________ The Purge Unit has been redesigned many times. The new purge along with the 0 Emissions Tank is quality plus. The new purge has an exterior in-line filter that can be replaced in short order with little work. People in the past wanted many reports about how the purge operated. Today those reports are available. 2 The opening question is, Why do we need purge systems? In polling your audience you may find that reasons for using purge systems may vary among students. This slide allows the instructor to search out strengths and weaknesses among his students and can open up various conversations. 3 Explain that purge systems remove non-condensibles which are in the form of air or nitrogen. Purge systems can collect water. The instructor should point out that the purge system is not designed to remove moisture, but will only give an indication of a wet system. 4 Because these machines will operate at a pressure less than atmo