简易频率特性测试仪论文设计.pdf

实用文档 2013 年全国大学生电子设计竞赛 简易频率特性测试仪（ E 题） 【本科组】 2013 年 9 月 6 日 文案大全 实用文档 摘 要 本实验以 DDS芯片 AD9854为信号发生器，以单片机 STM32F103RBT6为核心控 制芯片。系统由 5 个模块组成：正弦扫频信号模块，待测阻容双 T 网络模块，整 形滤波模块， A/D 转换模块及显示模块。先以单片机送给 AD9854控制字产生 1MHZ —40MHZ的扫频信号，经过阻容双 T 网络检测电路，两路路信号通过 AD9283对有 效值进行采集后进入单片机进行幅值转换，最终由 TFTLCD显示输出。 ABSTRACT In this experiment, the DDS chip AD9854 as the signal generator, MCU STM32F103RBT6 as the core control chip, and with FPGA as auxiliary, and on the peripheral circuit to realize the detection of amplitude frequency and phase frequency. The system comprises 6 modules: signal sine sweep signal module, the measured resistance capacitance of double T module, filter module, A/D conversion module and display module. The first single-chip microcomputer to AD9854 control word generate sweep signal of 10MHZ - 40MHZ, the resistance and capacitance of double T detection circuit, two road signals are collected on the effective value through the AD9283 into the microcontroller to amplitude conversion, the LCD display output, finally to complete the amplitude frequency and phase frequency of simple test. 文案大全 实用文档 目 录 1 系统方案 1 1.1 AD9854 模块的论证与选择 1 1.2 单片机控制系统模块的论证与选择 1 1.3 显示模块的论证与选择 2 1.3