RCMember计算对话框【robot】课件资料.pdf

第一章 RC Member 计算对话框 第二章 Calculations dialog (RC Member) 计算对话框 Modules for Beams, Columns, Foundations and Slabs design allow you to determine the required reinforcement area and a spacing of reinforcing bars within the cross-section of a concrete structure element. The RC Member Design module allows you to obtain a theoretical (required) area of reinforcement for selected concrete members. 第三章 Access ? Click Design Required Reinforcement of Beams/Columns - Options Calculations . ? Select RC Design RC Members - required reinforcement layout. 第四章 Dialog elements Note: When creating a structure model, you define geometrical 几何 parameters of concrete beams and columns (buckling parameters, allowable values of deflection and displacements at member ends). The code parameters of concrete structure elements (steel and concrete parameters and types of reinforcing bars), are defined in a Calculation 计算 Parameters 参数 dialog. Calculation type Defines the type of calculation. ? Design. ? Capacity verification 验证 (presently not available). Calculations for Specify elements taken into consideration during calculations. ? Members. ? Member groups (presently not available). Lists of elements are defined in three ways: ? Manually entering the member numbers in an appropriate 适当的 edit field. ? Starting a selection dialog box with a ... button. ? Indicating the elements on the screen with a structure view. Code combinations 组合 and lists of cases Specify the code combinations and load cases for each of analyzed limit states. A set of active fields is different for different codes. Choice fields for code combinations are active on