UL-SOTIF验收标准定义的工程实践.pdfVIP

Engineering Practice of SOTIF Acceptance Criteria Definition Simon Wu, David Li, Bill Taylor @ kVA by UL Stanislav Lincer, Monica Ma, Sharon Sun @ GWM July 8, 2021 Copyright kVA by UL, 2021. Agenda ❑ Acceptance criteria and validation target ❑ Validation effort and traffic statistics ❑ Open discussion Copyright kVA by UL, 2021. Acceptance criteria ❑ Acceptance criteria ❑ Acceptance criterion - criterion representing the absence of an unreasonable level of risk 1) Defined during hazard evaluation Note: The acceptance criterion can be of qualitative as 2) Specifies a principle for risk acceptance well as quantitative nature. 3) Does not specify specific targets for required validation mileage or hours of operation. ❑ Risk Acceptability - International Countries/governments have struggled for many years to determine risk acceptability 1) UK • As low as reasonably practicable (ALARP) is legislated, and is one of the most widely used approaches worldwide 2) Germany • Minimal endogenous mortality (MEM): minimal increase in overall death rate compared existing population death rate 3) France • Globally at least as good (GAMAB): risk no greater than for existing systems Copyright kVA by UL, 2021. Validation target ❑ Validation target - necessary target value and validation effort to argue ❑ Validation targets that acceptance criterion is met with a certain confidence