catia钣金设计教程.pptVIP

钣金设计;课程介绍;目錄;进入工作台 用户接口 术语 了解一般过程;进入工作台 ;文件扩展名.CATPart (与普通零件设计相同);Insert菜单或工具栏 ;术语;General Process;钣金Parameters;Before starting to create any钣金part, define the钣金Parameters of the part. These are common characteristics that when defined will make creation easier and thus limit your need to supply data during creation of the part.;Parameters are the common characteristic used in the creation of the part. They are as simple as stating the dimensional requirement of the material and bend radius;In order to start there are three basic parameters that need to be assigned: Material Thickness Bend Radius Bend Relief Type;;;;In this lesson, you will see how to start a钣金part and different ways to define walls;You will learn how to create the 5 basic types of walls offered in the钣金workbench;To start a钣金part, create some type of wall first to start from. It can be as little as one line that you can extrude a wall from or a complex pro create many walls from or a pro make an individual wall.;The Pro is used to create a wall of a specific shape. Often used as a first wall of a part;;;;;;;;Defining Walls on Existing Parts;Another way to start creating钣金walls is to take an existing solid and recognize (= change) the solid walls into钣金walls.;catia钣金设计教程;;钣金 弯曲and凸缘;弯曲can be created by four ways. If you choose, you can create your bend each time you create a wall on another wall or you can create a bunch of walls that show how your part will look and then use Automatic弯曲to create all of them at one time.;A钣金part is created from one piece of metal that is cut to the shape needed and folded to create the part. These folds are what is call弯曲.;In V5, the new methodology is to create groups of walls which have a common bend size. Allowing a group of walls to be created all at one time and save the steps of having to confirm the direction each time.;;;;;;;;凸缘come in four different types: Regular Flange, Hem Bend, Teardrop and Swept Flange.;凸缘are different ways to form钣金into tab