Introduction to Poka Yoke 防错技术培训和案例.pptVIP

SOLUTION 2 The line converted to single piece flow and added “successive inspection”. This is an improvement on self inspection, but still room for error and it still has to be sample inspected. SOLUTION 3 This is actually a process poka-yoke. As long as the operator follows the process, there will be no missing springs. Quality insspection is no longer necessary, the operator could assemble switches right into the box. SOLUTION 4 “Design for Lean” or “Desigm for SPS” Design the product so that it cannot be assembled incorrectly. This is the best solution. Sensing devices are the actua