基于PROE的搅蒜器结构设计和注射模具设计说明.pdfVIP

基于PRO/E的搅蒜器结构设计及其注射模具设计 摘 要：本文设计产品是当今炙手可热的厨房用品——搅蒜器,由于其造型美观、结构 独特、使用方便,所以深受欢迎,应用前景十分广阔。本文主要工作分为两大部分,一是 对搅蒜器产品进行三维造型：通过分析产品各个部分的功能,确定机构的运动方式和结 构形式,利用Pro/ENGINEER Wildfire 3.0对产品进行实体建模。二是对搅蒜器产品 关键受力塑件——搅蒜器下盖进行注射模具设计：分析搅蒜器下盖塑件的工艺结构及 品质要求,利用塑料顾问对产品进行模流分析 ,分析和优化注射成型工艺参数 ,通过 Pro/ENGINEER Wildfire 3.0提供的模具设计模块Pro/Moldesign对塑件进行模具 分型面创建、体积块抽取、模具装配以及开模运动仿真,利用Pro/E中外挂的模具专家 设计系统EMX4.1生成模架。设计的整个过程实现了无纸化,有利于提高模具的生产效 率和节约了生产成本,并大大缩短了生产的周期。 关键词 搅蒜器；三维实体造型；分型面；注塑模具；开模运动仿真 ： I / 65 搅蒜器 3D 装配图 搅蒜器下盖模架爆炸图 3D Molding and Design of Injection Mould for Garlic Grater Based on Pro/E II / 65 Abstract ：3D molding and design of injection mouldfor of the Garlic Grater are introduced, The Garlic Grater is very fast seller at nowadays. it attractive appearance, the structure is unique, easy to use, so it well received. The applicable foreground is very wild. This paper is divided into two parts, First, 3D Molding for Garlic Grater product underway, Analysis of some of the functions of various products, identify ways and structure of sport, an use of Pro / ENGINEER Wildfire 3.0 to the entity modeling, Secon is theGarlic Grater product key component-Garlic Grater -covere under the plastic mol design, analysis Garlic Grater -covere under the plastic parts of the structure and quality requirements, Through the Pro / ENGINEER Wildfire 3.0 provide the mold design features, Pieces of plastic injection molding process analysis, mol parting surface foundation, mol volume block extraction, mol open simulation, an mol assembly. An the use of plastic products consultant-flow analysis, an optimize the parameters, reuse Pro / ENGINEER Wildfire 3.0 expert in the mold design system-on-design. In the whole process, the designer realizes a non-paper work