外文翻译----通讯连接项目.docxVIP

附录A 外文原文 Configure communication 1. Configure communication Introduction This chapter contains information on configuring the communication between WinCC and an automation system. This chapter also describes how you create and scale tags. General procedure Use the editor Tag management to configure the communication. You will need at least the following components to configure the communication: = 1 \* GB3 ①One channel with channel units = 2 \* GB3 ②One connection = 3 \* GB3 ③One process tag In practice, you will achieve access to the current process values of the automation system by the c