RS Components 电工电料 安全继电器 2986575 使用说明.pdfVIP

PSR-...- 24DC/FSP2/2X1/1X2 SIL coupling relay Data sheet 104509_en_02 © PHOENIX CONTACT 2015-05-12 1 Description The PSR-FSP SIL coupling relay can be used for power ad- Features aptation and electrical isolation in high and low demand ap- – SIL 2 coupling relay for safety-related switching off plications up to SIL 2 according to IEC 61508 as well as EN 61511. – Can be used in high and low demand applications – Easy proof test according to IEC 61508 due to forcibly The safety relay is equipped with two enabling current paths guided signal contact that drop out without delay corresponding to stop category 0 according to EN 60204-1. – Integrated DCS test pulse filter By filtering the control controller test pulses, premature fail- – Two undelayed enable contacts ure of the forcibly guided safety relay is prevented. – Option of screw or spring-cage terminal blocks for plug- in WARNING: Risk of electric shock Observe the safety instructions in the corresponding section! Make sure you always use the latest documentation. It can be downloaded from the product at /products. This data sheet is valid for all products listed on the following pages. PSR-...- 24DC/FSP2/2X1/1X2 2 Table of contents 1 Description 1 2 Table of contents 2 3 Ordering data 3