电容主要参数的应用.pptVIP

電容主要參數的應用 作者:Morriss Su 2019.April 討論目的 1.介紹各參數代表的意義 2.利用參數預估計算所需值 討論主題 電容基本module介紹 電容基本參數介紹 如何應用參數決定電容 其它現象討論 一.電容基本Module介紹 1.REAL Module 2.DC Module 3.AC Module (Z=ESR) Frequency Vs Impedance 二.基本參數介紹 1.LEAKGE CURRENT Leakage current is the residual current which flows through the capacitor after the charging time underrated voltage. 2.Dissipation Factor It is a function of the series resistance of the capacitor and the capacitance at low frequency 3.Impedance=Z The formula for impedance is: Z=√(RΛ2+(Lω-1/C ω) Λ2) R: equivalent series resistance of the capacitor L: Inductance mainly due to the leads C: capacitance 4.Maximun current ripple Voltage ripple The maximum value of the ripple current or ripple voltage which can be applied to the capacitor is only limited by the thermal effect .The ESR and to the square of ripple current (P=ESR × lrmsΛ2) 三.如何應用參數決定電容 1.Output 波形 將V-ripple 分為 DC AC 實際電路與參數的關係 Leak I Z 對DC而言 可近似為 Vin ≒Vout ≒ 5V 對AC而言( 設 Z=ESR) 未裝電容時 Vin ≒Vout ≒ 50mV 電容並聯時 Voltage ripple: 50mvx(RC//Load)/Rc+(RD//Load)=33mV 如何選用適合的CAP Voltage Rating Chose Type Frequency Life Temp Calculator Output Impedance Check V Ripple in SPEC Calculator I Ripple in SPEC Test thermal calculator Life time Dimensions 1 2 * *