RS Components 电工电料 控制继电器 E3TF01 230V AC 使用说明.pdfVIP

Tripping unit for temperature monitoring E3TF01 Monitoring relays - ENYA series of the motor winding with and without short circuit monitoring of the thermistor line (selectable by means of terminals) Optional evaluation of one thermal contact Test function with integrated reset key Rated isolated voltage on the sensor circuit up to 690V 1 change over contact Width 35mm Installation design Technical data 1. Functions 7. Measuring circuit Temperature monitoring of the motor winding (max. 6 PTC) with Terminals: T1-T2 or T1-T3 fault latch for temperature sensors in accordance with DIN 44081, Initial resistance: 1.5kΩ short circuit monitoring of the thermistor line (selectable by means of Response value (relay in off-position): ≥3.6kΩ terminals), integrated test/reset key. Release value (relay in on-position): ≤1.65kΩ Disconnection (short circuit thermistor): yes at T1-T2 2. Time ranges no at T1-T3 Adjustment range Measuring voltage T1-T2: ≤7.5V at R ≤4.0kΩ Start-up suppression time (Start): - (in accordance with Tripping delay (Delay): - EN 60947