RS Components 电工电料 固态继电器 ASSR-1228-302E 使用说明.pdfVIP

ASSR-1218 , ASSR-1219 and ASSR-1228 Form A, Solid State Relay (Photo MOSFET) (60V/0.2A/10Ω) Data Sheet Description Features The ASSR-12XX Series consists of an AlGaAs infrared • Compact Solid-State Bi-directional Signal Switch light-emitting diode (LED) input stage optically cou- • Single and Dual Channel Normally-off Single-Pole- pled to a high-voltage output detector circuit. The Single-Throw (SPST) Relay detector consists of a high-speed photovoltaic diode array and driver circuitry to switch on/off two discrete • 60V Output Withstand Voltage high voltage MOSFETs. The relay turns on (contact • 0.2A or 0.4A Current Rating closes) with a minimum input current of 3mA through (See Schematic for ASSR-1219 Connection A and B) the input LED. The relay turns off (contact opens) with • Low Input Current: CMOS Compatibility an input voltage of 0.8V or less. • Low On-Resistance: 0.25Ω Typical for DC-only, The single channel configurations, ASSR-1218 and 1Ω Typical for AC/DC ASSR-1219, are equivalent to 1 Form A Electromechani- • High Input-to-Output Insulation Voltage cal Relays (EMR), and the dual channel configuration, (Safety and Regulatory Approved) ASSR-1228, is equivalent to 2 Form A EMR. They are available in 4-pin SO, 6-pin DIP, 8-pin DIP and Gull Wing - 3750 Vrms for