RS Components 电工电料 焊接套管 D-181-2224-90 9 使用说明.pdfVIP

Coaxial Cable Termination SolderSleeve Coaxial Cable Terminators Product Facts ■ Transparent polyvinylidene fluoride or polyolefin insulation sleeve provides encapsulation, inspectability, strain relief (eliminates center conductor breakage), and insulation. ■ Prefluxed solder preform provides a controlled soldering process ■ One-piece design provides easy installation and lower installed cost ■ Preinstalled termination leads provide convenience and ease of installation Applications Product Selection Process Used for terminating coaxial 1. Select product series 3. Determine cable RG cable to component termi- from the product options number or dimensions. nals, contacts, printed cir- table below. 4. Select part number from cuit boards, and solderless 2. Select preinstalled lead Table A (B-155, CWT wrap terminals. type from the table below. series) or Table B (B- 02X/B-04X series) on the next page. Product Options Product Series Max. perating Temp. Use on Cables Rated (Min) Cable Shield Plating Part No. Selection Table Design B-155, CWT 125°C [257°F] 85°C [185°F] Tin, copper A 2-pc. B-02X/B-04X 150°C [302°F]