WA330008 BICC协议分析 ISSUE30(中级 简化版).pptVIP

BICC 协议采用了承载和呼叫控制分离的模型，不存在实际的物理电路的概念。原ISUP中定义的与实际电路相关的管理、监视消息不再适用。 Call Mediation Node (CMN): A functional entity which provides call service functionality without an associated bearer control function entity. Transport Service is described in Recommendation Q.2150.0?[31]. The STCs are defined in other Recommendations in Q.2150.x series. Several arrangements are possible for nodes that support BICC signalling. These nodes may have an associated Bearer Control Function (BCF) in which case they are referred to as Serving Nodes (SN). A node without an associated BCF is referred to as Call Mediation Node (CMN). Between Serving Nodes the control of bearers is provided by other protocols - not specified by this Recommendation. In a Serving Node (SN), the Call Service Function and the Bearer Control Function (BCF) entities may be physically separated. The Call Bearer Control (CBC) signalling is used between these two entities in case of physical separation. The CBC protocol is specified in Recommendation Q.1950?[61]. Bearer control signalling can be deployed over a separate signalling transport or the Bearer Control Protocol (BCP) can be tunnelled over the horizontal BICC protocol between peer CSFs and the vertical CBC interface between a CSF and a BCF. The Bearer Control Tunnelling Protocol is specified in Recommendation Q.1990 [62]. Both SNs and CMNs are modelled using the Half Call modelling technique. Every call processing scenario is thus divided between an incoming and an outgoing signalling procedure. In the scope of this Recommendation at least one of this procedures is the BICC procedure (see Figure 1 and Figure?2).[half call :incoming and outgoing signalling procedure] 备注： （杜孝 1、Q.1920.1 Call Service Function (CSF): Four types of CSF are defined: ? The Call Service Nodal Function (CSF-N) provides the service control nodal actions associated with the narrowband service by interworking with narrowband and Bearer Independent Call Control (BICC) signall