9 汽车钢制轮辋整形装备与整形模具设计.docxVIP

STYLEREF 标题 摘 要 PAGE 8 PAGE 1 摘 要 随着汽车市场的飞速发展，对汽车制造的要求愈发严格。本设计针对汽车钢制轮毂的整形，被设计来专门针用于流水线生产，提高轮毂生产效率、减少劳动力。在本设计的这种设备大体上由四柱式液压机、液压卡盘、轮毂整形模具、以及其他控制系统组成。 本文在研究参考国内外针对不同尺寸型号的钢制轮毂整形的基础上，设计了采用大功率的四柱式液压机作为驱动，以及液压卡盘作为模具的加装，用双向模具对钢制轮毂进行尺寸整形，独立运动的四爪式液压卡盘加装模具机构作为钢制轮毂整形的重要结构，以此完成汽车钢制轮辋整形装备与整形模具的整体机械结构设计，四柱式液压机的选用，四爪式液压卡盘的设计，整形模具的结构尺寸设计及主要零部件的尺寸选择与强度检验校核作为主要内容。 本次设计完成的汽车钢制轮毂整形装备与整形模具，能对完成旋压后的钢制轮毂进行尺寸的校核，大大提高生产效率。 关键词：轮毂；四柱式液压机；液压卡盘；整形模具 STYLEREF 标题 ABSTRACT 基于DCT的JPEG基本系统的MATLAB实现 ABSTRACT With the fastly development of the automotive market, the requirements for automobile manufacturing are becoming more stringent. This design is designed for the shaping of automotive steel wheels. It is designed to be used for production line production, improve wheel production efficiency and reduce labor. Such equipment in this design generally consists of a four-column hydraulic press, a hydraulic chuck, a hub shaping die, and other control systems. Based on the research of steel wheel hubs of different sizes and models at home and abroad, this paper designs a four-column hydraulic press with high power as the drive, and the hydraulic chuck as the mold, and the size of the steel wheel hub with two-way mold. The shaping and independent movement of the four-jaw hydraulic chuck is used as an important structure for the shaping of steel hubs. The overall mechanical structure design of the steel rim shaping equipment and shaping mould is completed, and the four-column hydraulic machine is selected. The design of the hydraulic chuck, the structural size design of the shaping mold and the size selection and strength check of the main components are the main contents. The steel-steel wheel shaping equipment and shaping mold completed in this design can check the size of the steel wheel after the spinning, greatly improving the production efficiency. Key words: Rim; Four-column hydraulic press; Hydraulic chuck; Shaping mould STYLEREF 标题 目 录 PAGE 7 目 录 TOC \o 1-3 \h \z \u 摘 要