分布式货梯控制器及模型设计.pdfVIP

分布式货梯控制器及模型设计 分布式货梯控制器及模型设计 [摘要] 现阶段，国内传统的电梯控制是由继电器、接触器、逻辑电路构成的。它不仅存在 着可靠性差、成本高、故障率高等缺点,而且在层数增加时,其接线会变得越发复杂，给制造 及安装带来诸多不便。现利用单片机作为控制芯片，采用多个模块的数据通讯组合成整体控 制系统，对货梯进行模块化控制，简化了货梯的安装和维护。大大的提高了系统控制的优越 性，降低了成本，减小控制系统的故障率。 该设计主要以单片机为控制器，采用 RS485 将各楼层控制模块连接起来，并与电机控制 模块相连，实现了货梯控制器的模块化设计。 [关键词] 单片机 分布式货梯 RS485 I 分布式货梯控制器及模型设计 Distributed Lifts Controller and Model Design [Abstract] At this stage, the domestic traditional elevator control is done by relays, contactors, logic circuits. It is not only the existence of poor reliability, high cost, high failure rate and other shortcomings, but also in the number of layers increases, the wiring will become more complex, to the manufacture and installation inconvenience. Now the use of micro control, a plurality of data communication modules combined into the overall control system, modular control freight elevators, freight elevators simplify installation and maintenance. Greatly improve the system control advantages, reduce costs, reduce the failure rate of the control system. The design of the main microcontroller as controller, RS485 control module is connected to the floors together and connected to the motor control module, the modular design of the freight elevator controller. [Keywords] Micro,Distributed lifts,RS485 II 分布式货梯控制器及模型设计 目录 引言1 第 1 章 绪论2 III 分布式货梯控制器及模型设计 1.1 分布式货梯控制器简介 2 1.2 设计意义与背景 2 1.3 本设计主要工作 2 1.4 本文任务安排 3 第 2 章 系统方案设计4 2.