容器压强控制装置的设计.pdfVIP

容器压强控制装置的设计 容器压强控制装置的设计 [摘要] 随着科学的不断发展，无论在生活还是工作中，人工逐渐被自动化所替代。自 动化大大减少了人们繁重的工作量，提高了社会生产力以及生产能力与质量，使用性安 全可靠，使用性能增强以及改善了劳动条件。 本文主要介绍了一个基于单片机和压力传感器的容器压强控制的装置，压力传感器 与 TL084ACD 四运算放大器构成传感器模块、LCD12864 液晶显示器与 STC12C5A60S2 芯片 构成单片机模块、TLP521-2 光耦芯片与两条电路分别是进气和出气相连构成压力控制模 块和 78L05 三端稳压器作为整个电路的电源。运用气压传感器进行气体压强的测量，可 以通过液晶显示器识别当前的压强数值，进而确定是否对气缸进行相应的放气或进气。 最终实现容器压强的控制。 [关键词] 单片机 压强控制 液晶显示屏 光耦芯片 I 容器压强控制装置的设计 Design pressure control apparatus for a container [Abstract] With the development of science, whether in life or work, labor gradually replaced Automation. Automation greatly reducing the heavy workload of people and improve the social productive forces and the production capacity and quality, the use of safe, reliable, performance enhancements, and improved working conditions. This paper describes a container-based pressure control means microcontroller and pressure sensors, pressure sensors and TL084ACD four operational amplifiers sensor module, LCD12864 LCD display and STC12C5A60S2 microcontroller chip module constitution, TLP521-2 optocoupler chip with two circuits It is connected to the inlet and outlet pressure on the control module and 78L05 three-terminal regulator as the power supply of the entire circuit. Using the pressure sensor, the measurement of gas pressure, to identify the current through the liquid crystal display the pressure value, and then determine whether to corresponding deflated or inlet cylinder. The realization of ultimate pressure container control. [Keywords] microcontroller ,pressure control , Liquid crystal display, optocoupler chip. II 容器压强控制装置的设计 III