Minitab系统的基本操作.pptVIP

Paired Comparison Select the samples… Go to Graphs…. 第九十五页，共一百三十四页。 Scatter plot.... Go to: Graph… Plot... 第六十三页，共一百三十四页。 Scatter Plot.... Fill out the screen as follows: Select GPA for our Y Variable…. Select Math and Verbal for our X Variables….. Select OK when done... 第六十四页，共一百三十四页。 Scatter plot.... We now have two Scatter plots of the data stacked on top of each other… We can display this better by tiling the graphs…. 第六十五页，共一百三十四页。 Scatter plot.... To do this: Go to Window… Tile... 第六十六页，共一百三十四页。 Scatter plot.... Now we can see both Scatter plots of the data… 第六十七页，共一百三十四页。 Scatter plot.... There is another way we can generate these scatter plots…. Go to: Graph… Matrix Plot... 第六十八页，共一百三十四页。 Scatter Plot.... Fill out the screen as follows: Click in the “Graph variables” block Highlight all three available data sets… Click on the “Select” button... Select OK when done... 第六十九页，共一百三十四页。 Scatter plot.... We now have a series of Scatter plots, each one corresponding to a combination of the data sets available… Note that there appears to be a strong correlation between Verbal and both Math and GPA data…. 第七十页，共一百三十四页。 Minitab Statistical Tools 第七十一页，共一百三十四页。 PROCESS CAPABILITY ANALYSIS 第七十二页，共一百三十四页。 Let’s do a process capability study…. Open Minitab and load the …. 第七十三页，共一百三十四页。 SETTING UP THE TEST…. Go to Stat… Quality Tools…. Capability Analysis (Weibull)…. 第七十四页，共一百三十四页。 Select “Torque” for our single data column... Enter a lower spec of 10 and an upper spec of 30. Then select “OK”…. SETTING UP THE TEST…. 第七十五页，共一百三十四页。 Note that the data does not fit the normal curve very well... Note that the Long Term capability (Ppk) is 0.43. This equates to a Z value of 3*0.43=1.29 standard deviations or sigma values. This equates to an expected defect rate PPM of 147,055. INTERPRETING THE DATA…. 第七十六页，共一百三十四页。 HYPOTHESIS TESTING 第七十七页，共一百三十四页。 Load the ….. Setting up the test in Minitab 第七十八页，共一百三十四页。 Checking the Data for Normality…. It’s important that we