Roland罗兰乐器GI-20 GK-MIDI接口GI-20 TurboStart支持文档.pdf

®ÂØÒňΠGI-20 TurboStart GK-MIDI Interface Welcome • Poly mode—lets you transmit all six strings on one MIDI channel. Use this mode if the sound Congratulations on your purchase of the Roland module youre triggering can receive MIDI data GI-20 GK-MIDI Interface. This TurboStart contains on only one channel at a time, or if you want all step-by-step instructions that w ill quickly get you set six strings to play the same sound. up in the GI-20. Use the following steps to set the desired Mono/Poly mode for the current patch: Setting Sensitivity 1. Turn the PARAMETER knob to MIDI CHANNEL. Adj usting the sensitivity in the GI-20 is crucial for 2. To select: optimum tracking results. Use the follow ing steps to • Mono mode—press PATCH/VALUE  or set the sensitivity .  until “Nn” appears in the display. • Poly mode—press PATCH/VALUE  or Note: The following steps assume that a GK pickup  until “PL” appears in the display . system (GK-3, GK-2 etc.) has been installed correctly on your guitar and is functioning properly. 3. When you’re finished, turn the PARAMETER knob