数字信号处理英文版课件：Chap 9 IIR Digital Filter Design.pptVIP

DSP group 2007 chap9-ed1 * 9.4 Design of highpass IIR Digital Filters Step 1: Prewarp the specifications: Step 2: Obtain the specification of lowpass prototype: Let the passband edge frequency of the prototype be ?p=1; then the stopband edge frequency Assume T=2 DSP group 2007 chap9-ed1 * 9.4 Design of highpass IIR Digital Filters the specifications of prototype analog lowpass filter HLP(s) : Step 3: Design the filter HLP(s) (Butterworth); Order: N=7; Cutoff frequency: ?c=0.3691; (% buttord(wp,ws,rp,rs)) DSP group 2007 chap9-ed1 * 9.4 Design of highpass IIR Digital Filters Transfer function of HLP(s) : Step 4: Frequency transformation again; Step 5: Bilinear transformation. DSP group 2007 chap9-ed1 * 9.4 Design of highpass IIR Digital Filters ? ? magnitude phase DSP group 2007 chap9-ed1 * 9.5 Spectral Transformations of IIR Digital Filters Lowpass prototype digital filter HLP(z), Frequency transfrom Desired other types of digital filter HD(z), z=F(z) I.e., HD(z) = HLP{ }, F(z) See Table 9.1 in page 382 DSP group 2007 chap9-ed1 * Example 9.4: Consider the lowpass digital filter Redesign the lowpass filter to move the passband edge frequency from 0.25? to 0.35?. 9.5.1 Lowpass-to-Lowpass Transformation Solution : According to the requirement: * 9.5.1 Lowpass-to-Lowpass Transformation DSP group 2007 chap9-ed1 * Example 9.5: Consider the lowpass digital filter Redesign a highpass filter with: 9.5.2 Lowpass-to-Lowpass Transformation Solution : According to the requirement: * 9.5.2 Lowpass-to-Lowpass Transformation DSP group 2007 chap9-ed1 * Summary ? IIR (CT→DT) – easy to design (closed-form solutions) – economic to implement ? Procedure: (1) specification transformation: prewarping ? =(2/T)tan(?/2) for bilinear (2) design CT filter (3) CT →DT (bilinear): DSP group 2007 chap9-ed1 * Page 389 9.1 (a) (b), 9.6 , 9.9 (a) Page 389 9.12, 9.11(a) , 9.9(b)(using bilinear transformation) Su