NEC PD17P709A handbook说明书用户手册.PDF

DATA SHEET MOS INTEGRATED CIRCUIT µ PD17P709A 4-BIT SINGLE-CHIP MICROCONTROLLER WITH DEDICATED HARDWARE FOR DIGITAL TUNING SYSTEM DESCRIPTION The µ PD17P709A is produced by replacing the on-chip mask ROM of the µ PD17704A, 17705A, 17707A, 17708A, and 17709A with a one-time PROM. The µ PD17P709A allows programs to be written once, so the µ PD17P709A is suitable for preproduction in µ PD17704A, 17705A, 17707A, 17708A, or 17709A system development or low-volume production. When reading this document, also refer to the publications on the µ PD17704A, 17705A, 17707A, 17708A, or 17709A. The electrical characteristics (including power supply current) and PLL analog characteristics of the µ PD17P709A differ from those of the µ PD17704A, 17705A, 17707A, 17708A, and 17709A. In high-volume application set production, be sure to carefully check these differences. FEATURES • Compatible with the µ PD17704A, 17705A, 17707A, 17708A, and 17709A • On-chip one-time PROM: 32 KB (16384 × 16 bits) • Supply voltage: VDD = 5 V ± 10% ORDERING INFORMATION Part Number Package µ PD17P709AGC-3B9 80-pin plastic QFP (14 × 14) The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local