8642B Synthesized Signal Generator 100 kHz to 2100 MHz (Discontinued - Support Information Only) Data Sheet说明书用户手册.PDF

8642B Synthesized Signal Generator, 100 kHz to 2100 MHz (Discontinued - Support Information Only) Data Sheet Frequency Specifications Range: 100 kHz to 2115 MHz Bands: The full range is covered in one continuous span. However, many specifications are dependent on carrier frequency. To simplify such specifications, the carrier frequency ranges are divided into bands as shown below: Band Carrier frequency (MHz) 10 1057.500001 to 2115 9 528.750001 to 1057.5 8 264.375001 to 528.75 7 132.187501 to 264.375 6 66.093751 to 132.1875 5 33.046876 to 66.09375 4 16.523438 to 33.046875 3 8.261719 to 16.523437 2 4.130860 to 8.261718 1 0.1 to 4.130859 HET 0.1 to 132.1875 Sweep Modes: Start-stop, span, and phase continuous X-Axis Output: 0 to 10 Vdc, ±10% Y-Axis Output: TTL positive true for display blanking during retrace Resolution: 1 Hz, 0.1 Hz with special function Stability Standard: Aging rate: ±2 ppm/year Option 001: 10e-9/day aging rate after 8 days warmup Spectral Purity Specifications Residual FM (in CW, AM or Angle Modulation 1/3 max dev) 500 MHz: 1.2 Hz (0.3 to 3 kHz BW), 2 Hz (0.05 to 15 kHz BW) 1000 MHz: 2 Hz (0.3 to 3 kHz BW), 5 Hz (0.05 to 15 kHz BW) 2000 MHz: 5 Hz (0.3 to 3 kHz BW), 9 Hz (0.05 to 15 kHz BW) SSB Phase Noise at 20 kHz Offset (CW, AM or FM/PhiM 1/60 max dev) 125 MHz: -144 dBc/Hz 200 MHz: -141 dBc/Hz 500 MHz: -137 dBc/Hz 1000 MHz: -134 dBc/Hz 2000 MHz: -125 dBc/Hz Residual AM: 0.01% AM rms, 0.3 to 3 kHz BW Spurious Harmonics: -30 dBc at = +10 dBm (-25 dBc fc 1057.5 MHz) Subharmonics: None, fc =1057.5 MHz (-45 dBc fc 1057.5 MHz) Nonharmonics (10 kHz offsets): -100 dBc (-94 dBc fc 1057.5 MHz) Third Order Intermodulation: -50 dBc at +10 dBm, 2 generators 25 kHz apart into a resisti