工程中掌握残余应力在构件中的分布规律的重要性探究（行业资料）.docVIP

工程中掌握残余应力在构件中的分布规律的重要性探究（行业资料） 文档信息 ： 文档作为关于“行业资料”中“医学资料”的参考范文，为解决如何写好实用应用文、正确编写文案格式、内容素材摘取等相关工作提供支持。正文12815字，doc格式，可编辑。质优实惠，欢迎下载！ 目录 TOC \o 1-9 \h \z \u 目录 1 正文 1 文1：工程中掌握残余应力在构件中的分布规律的重要性探究 2 （1）铝合金残余应力检测方法的准确度研究 11 2）铝合金材料超声声弹性效应及单向应力系数的标定。 11 （2）铝合金壁板结构件应力场综合表征体系研究 11 结论 15 文2：土木工程中构件连接节点分析论文 16 1构件节点的发展历程 16 2节点连接的类型和特点 17 2．1榫卯连接 17 2．2铆钉连接 17 2．3螺栓连接 17 2．4焊接 18 2．5铸钢节点 18 3归纳对比 19 参考文摘引言： 19 原创性声明（模板） 20 文章致谢（模板） 20 正文 工程中掌握残余应力在构件中的分布规律的重要性探究（行业资料） 文1：工程中掌握残余应力在构件中的分布规律的重要性探究 Abstract Residual stress is an inherent stress prevalent in metal structural membe. The existenceof residual stress has obvious influence on the structural bearing capacity， buckling strength， brittle fracture， fatigue strength， stress corrosion and dimeional accuracy of aluminum alloystructural parts. Therefore， the characteristics of residual stress and its components aremastered in engineering design. The size and distribution pattern in the middle is especiallyimportant. At present， there are many methods for detecting residual stress at home andabroad. However， due to the limitatio of itrumentation and detection methods， a singledetection method is difficult to meet the requirements of aluminum alloy residual stressdetection in engineering products. Therefore， it is of great engineering significance to studythe combined technology of residual stress detection methods for aluminium alloys。 This Article fit analyzes the influence of the microstructure and detection paramete ofthe ray method on the detection results. According to the microstructure of the aluminumalloy commonly used in spacecraft， the detection paramete of the ray method are optimized， the paramete of the ultrasonic detection system are determined， and the unidirectional stressis derived. Under the acoustic elastic equation， the unidirectional stress coefficient of 5A06and 5B70 aluminum alloys was calibrated by teile test. Then， the equal-strength beam wasdesign