Dell戴尔Driver and Firmware Version Requirements for ScaleIO Ready Node Deployments Based on 13th Generation PowerEdge Servers说明书用户手册.pdf

Driver and Firmware Version Requirements for ScaleIO Ready Node Deployments (200-series) for ScaleIO Ready Node r630 and r730xd The following table lists the driver and firmware versions required for ScaleIO Ready Node deployments. NOTES: • The table lists the latest version of the driver, BIOS, and firmware qualified by Dell EMC. • Customers are required to run the versions listed in the table. • Follow the upgrade procedures in the VxFlex OS Upgrade Guide. Download the complete documentation set for the ScaleIO Ready Node from: /products/41077/Documentation/ Search for: • ScaleIO Ready Node with AMS Documentation Library • ScaleIO Ready Node with no AMS Documentation Library • You can also use an ISO image that includes the updated firmware and drivers pack (available for the each of the supported OS versions). The firmware are drivers that are updated in a single reboot cycle. In the Product Tool grouping, download the latest version: /downloads/41077_ScaleIO-Ready-Node. Note: For Linux and Windows the ISO includes a driver OS package that installs the relevant driver when using the Lifecycle controller. This applies when you are reinstalling the node. • As some of the drivers are not part of the Lifecycle Controller install, download the latest driver package from the Dell EMC support site, using the following link: /downloads/41077 Note: If a driver is not part of the Lifecycle Controller or driver zip packages the native OS driver is used.