EMERSON艾默生 Installation Instructions Canadian Standards Association Intrinsic Safety Installation Instructions 9-Wire Micro Motion说明书用户手册.pdf

Installation Manual MMI Rev BB October 2018 CSA-D-IS Installation Instructions, 9-Wire Preparation Safety and approval information This Micro Motion product complies with all applicable European directives when properly installed in accordance with the instructions in this manual. Refer to the EU declaration of conformity for directives that apply to this product. The EU declaration of conformity, with all applicable European directives, and the complete ATEX Installation Drawings and Instructions are available on the internet at or through your local Micro Motion support center. Information affixed to equipment that complies with the Pressure Equipment Directive, can be found on the internet at . For hazardous installations in Europe, refer to standard EN 60079-14 if national standards do not apply. Other information Full product specifications can be found in the product data sheet. Troubleshooting information can be found in the configuration manual. Product data sheets and manuals are available from the Micro Motion web site at . Return policy Follow Micro Motion procedures when returning equipment. These procedures ensure legal compliance with government transportation agencies and help provide a safe working environment for Micro Motion employees. Micro Motion will not accept your returned equipment if you fail to follow Micro Motion procedures. Return procedures and forms are available on our web support site at , or by phoning the Micro Motion Customer Service department. Emerson Flow customer service Email: • Worldwide: flow.support@ • Asia-Pacific: AP