EMERSON艾默生 Manual Mounting a DVC6020 DVC6020 Digital Valve Controllers on Fisher Type 585 and 585R Size 100 Actuators, 2 to 3 Inch Travel说明书用户手册.pdf

Mounting a DVC6020/DVC6020 Digital Installation Instructions Valve Controller on Fisher Type 585 and June 2007 585R Size 100 Actuators, 2 to 3 Inch Travel Use these instructions to mount a FIELDVUE actuator, releasing all pressure from the actuator. DVC6020 or DVC6020f digital valve controller on Use lock-out procedures to be sure that the above Fisher Type 585 and 585R size 100 actuators, with measures stay in effect while you work on the 2 to 3 inch travel. equipment. WARNING WARNING To avoid personal injury due to the Avoid personal injury or property sudden, uncontrolled movement of damage from sudden release of process parts, do not loosen the stem connector pressure or bursting of parts. Before cap screws when the stem connector performing any installation operations: has spring force applied to it. Always wear protective clothing, 2. Remove the cover plate screws and cover plate gloves, and eyewear. from the actuator, if present. Disconnect any operating lines 3. During the attachment of the cam bracket providing air pressure, electric power, (key 11) to the valve stem connector it will be or a control signal to the actuator. Be necessary to loosen the stem connector cap screws. sure the actuator cannot suddenly