romer绝对测量臂用户使用指南.doc1003romer绝.docx

HEXAGON Version June 2017 ? MANUFACTURING INTELLIGENCE ROMER Absolute Arm USER MANUAL ROMER ABSOLUTE ARM User Manual HYPERLINK / Hexagon Metrology Division ROMER Z.A. des Bois Blanche. F- 41800 MONTOIRE-sur-le Loir France. Tel: +6.40.40 HYPERLINK mailto:romerfr.service@ romerfr.service@ Hexagon Metrology Inc. 3536 Seagate Way, Suite 100 OCEANSIDE, California 92056 U.S.A. Tel: +1 760-994-1401 HYPERLINK mailto:factorysupportocn.us@ factorysupportocn.us@ ROMER Absolute Arm Manual V4.10.1 (14/06/2017) 2 INTRODUCTION Dear customer, thank you for purchasing a HEXAGON? product. Before starting any operation with your new HEXAGON? 3D measuring arm, please read these instructions. This guide describes best practices for installing, configuring, and using your measuring arm. For any other device or option not described in this manual please refer to other HEXAGON? products manuals (e.g. RDS Data Collector, RDS User) available on the ROMER Absolute Arm / DVD. For further information, please contact your local Hexagon Manufacturing Intelligence agent. ? TRADEMARK NOTE ROMER? is a registered trademark of HEXAGON AB in the United States and selected other countries. ROMER ABSOLUTE ARM? is a trademark of HEXAGON AB. Wi-Fi? and the Wi-Fi logo are trademarks of Wi-Fi Alliance. ? IMPORTANT NOTE All information contained in this document is subject to be modified without any notification and does not represent any engagement from HEXAGON AB. The software described in this manual is furnished under licence agreement and must be used only in conformity with the terms of this licence. No part of this manual may be reproduced or transmitted under any form or by any way, electronic or mechanical, including photocopy or recording, for any purpose without Hexagon AB formal authorisation. ? HEXAGON MANUFACTURING INTELLIGENCE ? DISCLAIMER NOTE All non-authorised modification, repair or bad use of the HEXAGON? system will automatically void the original manufacturer’s guaranty. The manufac