CCIE实验室考试指南(4).pdfVIP

CCIE实验室考试指南(4) Using the diagram below configure Network Time Protocol. Send_ntp will provide time to Receive_ntp. Use your current time and location for your clock settings. Solution: Set the appropriate time and time zone for the router that will act as your time server. Also set the time server using the “ntp master “ command. At the appropriate interface broadcast the NTP protocol. Send_ntp#clock set 07:30:00 20 jan ... 1999 Send_ntp#config t Enter configuration commands, one per line. ... End with CNTL/Z. Send_ntp(config)#clock ? summer-time Configure summer (daylight ... savings) time timezone Configure time zone Send_ntp(config)#clock timezone est 5 Send_ntp(config)#clock summer-time ? WORD name of time zone in summer Send_ntp(config)#clock summer-time est ? date Configure absolute summer time recurring Configure recurring summer time Send_ntp(config)#clock summer-time est ... recurring Send_ntp(config)#int s0 Send_ntp(config-if)#ntp broadcast Send_ntp(config)#ntp master Send_ntp#sh run Building configuration... %SYS-5-CONFIG_I: Configured from console by ... console Current configuration: ! ! Last configuration change at 07:40:38 est ... Wed Jan 20 1999 ! version 11.3 no service password-encryption ! hostname Send_nt ! ! clock timezone est 5 clock summer-time est recurring ! interface Ethernet0 ip address 172.16.2.32 255.255.255.0 ! interface Serial0 ip address 172.16.4.5 255.255.255.252 no ip mroute-cache ntp broadcast no fair-queue ! interface Serial1 no ip address shutdown ! router rip network 172.16.0.0 ! ip classless line con 0 line 1 8 line aux 0 line vty 0 4 ! ntp master end To configure the