机械制图与AutoCAD（英文版）课件 Lecture 8 Dimensioning of composite solids.ppt

;Correctness:;Any composite solid may be dimensioned easily and systematically by applying the shape analysis to break the composite solid down into its basic geometric solids.;SF;20; regular hexagonal prism: two size dimensions ;F;Rules: 1) Cylinders and cones should be preferably dimensioned in the non-circular views; The radius is given where the arc is shown in true shape. 2) Group related dimensions on the view showing the contour of a feature. 3) In order to save space, most dimensions should be placed between the views, if possible. ;Rules: 4) Avoid dimensioning to hidden lines. Holes should be dimensioned in the view where they appear as circles.;F 20;2.Dimensioning of basic solids with slanted surfaces or notches. ;22;24;14;F 40;3.Dimensioning of base plates:;F ;4. How to dimension clearly:;2) The diameters of concentric cylinders are preferably placed in the view where they appear as rectangles.;3) It is considered bad practice to cross dimension lines. Also, extension lines should avoid crossing other extension lines whenever possible. This problem can be avoided if the largest dimension is always placed furthest away from the object.;Example : Dimensioning the bearing support.;height datum ;③ Place the size and location dimensions of each basic solid.