ABB GEH-5660 Spectra Series Busway Evolution™ Switchboard Stub Connection installation instructions 说明(英语)用户手册.pdf

GEH-5660 Installation Instructions R01 Spectra Series™ Busway Evolution™ Switchboard Stub Connection DANGER: DO NOT perform any installation procedures described below without de-energizing the Busway/Switchboard AND ensuring the main circuit breaker device is OFF. Before Installation Before any installation work is performed, study all drawings furnished by the supplier for the installation. These include arrangement drawings (front, end, and plan view), connection diagrams, and schedule of equipment. Any material exterior to the equipment that may be required to meet any local codes is not furnished. Storage Precautions Before storing, unpack sufficiently to check the busway for possible concealed damage resulting from shipping and handling. If damage has occurred, notify the shipper immediately. If the busway is free of damage, restore the packing until ready for installation. Store indoors in a clean, dry area, preferably close to the installation points. Protect the busway from mechanical damage and any contact with or exposure to corrosive fumes, liquids, salts, or concrete. Failure to store and protect the busway properly can cause serious damage and will void the warranty. NOTICE: No busway, including outdoor rated, is weatherproof until completely and properly installed GEH5660 (Rev. 01)